MSFFM3038 - Set up, operate and maintain automated edge banding machines
Nominal hours
Location
Prerequisites
Co-requisites
(Corequisite units must be studied concurrently with this unit)
Overview
This unit describes the skills and knowledge required to set up, operate and maintain edge banding machines which use automated processes to apply and process an edge trim to solid timber or manufactured board.Workers with this competency follow established procedures in timber technology industries, using discretion, judgement and problem solving to identify and resolve routine product and machine issues.
Assessment
For Melbourne campuses
Assessment tasks will be designed to reinforce & extend knowledge and skill competence within set & controlled parameters in accordance with each unit's learning outcomes & performance criteria requirements, including the setting of work-based practical application tasks designed to provide evidence of competence outcomes, within periodic and scheduled timelines.
Students will be expected to demonstrate the following required skills:
- set up and operate an automated (not fully automatic) edging machine to apply at least 3 different edge treatment materials
- complete operator maintenance at least once, including:
- checking that guards, safety switches, and machine jigs and attachments are functioning correctly
- servicing machine lubrication points
- identifying tooling needing sharpening and repair
- checking that drive belts are undamaged and correctly tensioned
- cleaning machine at the end of a production run
- checking that electrical systems are functioning, and identifying issues for referral to qualified electrician
- completing maintenance documentation.
Students will also be expected to demonstrate the following knowledge:
- workplace procedures for:
- work health and safety
- quality assurance and tolerance levels
- reporting of machinery faults and material defects
- functions and characteristics of edge banding machines:
- pre-milling technology
- standard automated edgers (not fully automatic)
- soft forming machines
- risk control measures, including personal protective equipment (PPE), for the following hazards
- cutting and crushing hazard
- objects and particles thrown by machine
- noise
- airborne contaminants
- slips, trips and falls
- manual handling injuries
- characteristics of timber and board products and adhesives commonly used with edge banding machines, and of these edging products:
- solid timber
- laminates
- plastics
- non-ferrous materials and foils.
Required reading
The qualified trainer and assessor will provide teaching and learning materials as required in the form of workbooks produced by Victoria University and/or via the Victoria University e-learning system.
As part of a course
This unit is studied as part of the following course(s):