MSFFF2013 - Maintain spray equipment and booth

Unit code:MSFFF2013Study level:TAFE

Nominal hours

24

Location

Sunshine

Prerequisites

(Or equivalent to be determined by unit coordinator)
Co-requisites
(Corequisite units must be studied concurrently with this unit)

Overview

This unit describes the skills and knowledge required to strip, clean, restore and service spray equipment and booths.Workers with this competency undertake entry-level work under supervision in the furnishing industry.

Assessment

For Melbourne campuses

Assessment tasks will be designed to reinforce & extend knowledge and skill competence within set & controlled parameters in accordance with each unit's learning outcomes & performance criteria requirements, including the setting of work based practical application tasks designed to provide evidence of competence outcomes, within periodic and scheduled timelines.

Students will be expected to demonstrate the following required skills:

  • disassemble, maintain and re-assemble at least 2 of the following spray systems:
  • computerised spray system
  • electrostatic spray gun
  • powder-coating spray gun
  • air compressor, including its hoses and dryers
  • conventional suction-fed spray gun
  • conventional gravity-fed spray gun
  • pressure pot system
  • airless spray system
  • maintain a booth and booth services on at least 2 occasions, from either of the following types of booth:
  • dry filter bath
  • purpose-designed, positive-pressure, down-draft water booth.

Students will also be expected to demonstrate the following knowledge:

  • spray system equipment and procedures
  • maintenance requirements for spray booth services, including:
  • ventilation
  • lighting
  • water
  • electrical reticulation
  • paint lines
  • consumables storage areas
  • types of cleaning solvents and agents and their characteristics
  • material safety management systems
  • sources of work information, including:
  • workplace procedures relating to the use of tools and equipment
  • work instructions
  • workplace procedures relating to reporting and communication
  • manufacturer specifications and operational procedures
  • common types of materials used in maintaining spray equipment and booths, including:
  • water
  • solvents and other cleaning compounds and chemicals
  • rags
  • steel wool
  • brushes
  • hoses
  • brooms
  • squeegees
  • common types of tools used in maintaining spray equipment and booths, including:
  • liquid containers
  • feeding systems
  • spray guns
  • scrapers (non-ferrous) screwdrivers
  • shifting spanners
  • spanners
  • work health and safety requirements, including personal protective equipment (PPE).

Required reading

The qualified trainer and assessor will provide teaching and learning materials as required in the form of workbooks produced by Victoria University and/or via the Victoria University e-learning system.

As part of a course

This unit is studied as part of the following course(s):

Search for units, majors & minors