MEM07007 - Perform milling operations
Nominal hours
Location
Prerequisites
MEM09002 - Interpret technical drawing
MEM11011 - Undertake manual handling
MEM12023 - Perform engineering measurements
MEM12024 - Perform computations
MEM13015 - Work safely and effectively in manufacturing and engineering
MEM14006 - Plan work activities
MEM16006 - Organise and communicate information
MEM18001 - Use hand tools
(Or equivalent to be determined by unit coordinator)
Co-requisites
(Corequisite units must be studied concurrently with this unit)
Overview
This unit of competency has been developed for Engineering Tradesperson - Mechanical apprenticeship training and the recognition of trade-level skills in using a range of milling machines to produce components to required tolerances and specifications using all types of accessories.
Skills covered by this unit are generally applied in occupational and work situations associated with trade-level fitting and machining work.
Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Assessment
For Melbourne campuses
Assessment tasks will be designed to reinforce and extend knowledge and skill competence within set and controlled parameters in accordance with each unit’s learning outcomes and performance criteria requirements, including the setting of work based practical application tasks designed to provide evidence of competence outcomes, within periodic and scheduled timelines.
Students will be expected to demonstrate the following required skills:
- following work instructions, standard operating procedures (SOPs) and safe work practices;
- identifying and interpreting engineering drawings to AS 1100,401-1884 (R2014) Technical drawing to determine;job requirements for milling operations, including quantity, material, measurements and tolerances;
- selecting cutting tools using International Standard Organisation (ISO) standards or according to SOPs from drawings, sketches, specifications and instructions, as appropriate;
- fixing of job and tooling to specifications;
- calculating and setting required speeds and feeds;
- undertaking milling operations to specifications;
- checking components for conformance to specifications, and;
- rectifying non-compliant product.
Students will also be expected to demonstrate the following knowledge:
- safe work practices and procedures and use of personal protective equipment (PPE);
- sequence of milling operations to achieve the job requirements;
- cutter types and tooling geometry;
- consequences of varying speeds and feeds from the optimum rates calculated
effects of different materials on cutting speeds and feeds; - conventional and climb milling techniques and their applications;
- application of each of the following - slab, gang, shell, slot and form and slitting;
- use of dividing heads and rotary tables when milling components;
- procedures for using dividing heads and rotary tables on milling machines;
- appropriate techniques, tools and equipment to measure milled components, and;
- tools, techniques and equipment for checking components for conformance to specifications and rectifying non-compliant components.
Required reading
The qualified trainer and assessor will provide teaching and learning materials as required in the form of workbooks produced by Victoria University and/or via the Victoria University e-learning system.
As part of a course
This unit is studied as part of the following course(s):