CPCPWT4011 - Design and size heated and cold-water services and systems

Unit code:CPCPWT4011Study level:TAFE

Nominal hours

80

Location

Sunshine

Prerequisites

(Or equivalent to be determined by unit coordinator)
Co-requisites
(Corequisite units must be studied concurrently with this unit)

Overview

This unit specifies the skills and knowledge required to design, size and document the layout of heated, tempered and cold-water services, flushing systems, and hydrant and hose reel systems for residential and commercial multi-floor buildings.

Assessment

For Melbourne campuses

Assessment tasks will be designed to reinforce & extend knowledge and skill competence within set & controlled parameters in accordance with each unit’s learning outcomes & performance criteria requirements, incl the setting of work based practical application tasks designed to provide evidence of competence outcomes, within periodic and scheduled timelines.
Students will be expected to demonstrate the following required skills:
* designing, sizing and documenting the layout and schematic details for a commercial building with the design incorporating:
* an approved heated/tempered circulating system and cold-water system to a minimum of seven floor levels. Each floor level must include a hydrant and hose reel system
* at least five levels with the following fixtures on each floor level:
* a disabled bathroom incorporating a water closet (WC) and basin
* male toilet facilities including three WCs, three basins and three individual urinals or an equivalent sized urinal slab incorporating a mains pressure flush valve system
* female toilet facilities including five WCs and three basins
* a shower
* a kitchen sink for tea making purposes
* one floor level containing a commercial kitchen with food preparation area including at least:
* a commercial dishwasher
* a commercial pot wash facility
* a commercial glasswasher
* a basin
* one floor level containing a plant room
* designing, sizing and documenting the layout and schematic details for a residential building with the design incorporating:
* an approved heated/tempered water system and a drinking and non-drinking cold water system to a minimum of seven floor levels, inclusive of basement, to include fixtures on each floor level (excluding the basement).
* at least the following fixtures on each floor level:
* three baths
* six showers
* six WCs
* six basins
* three kitchen sinks
* three dishwashers
* three laundry tubs
* three clothes washing machines.

Students will also be expected to demonstrate the following knowledge:
* process of designing, sizing and documenting the layout of heated, tempered and cold-water services and systems
* properties of water, including pressure and flow rates
* heated, tempered and cold-water services and flushing systems, and fire hydrant and hose reel systems, including non-drinking water requirements
* mains pressure flushing devices
* selection requirements for installing:
* thermostatic mixing valves
* backflow prevention devices
* drawing instruments and sketching techniques, including the use of conventional symbols
* use of computers for documentation
* computer-aided design software
* how to access relevant information, including codes and standards
* tools, materials and equipment used to design and size heated and cold-water services and systems
* work health and safety (WHS) requirements for designing and sizing heated and cold-water services and systems.

Required reading

The qualified trainer and assessor will provide teaching and learning materials as required in the form of workbooks produced by Victoria University and/or via the Victoria University e-learning system.

As part of a course

This unit is studied as part of the following course(s):

Search for units, majors & minors